Bespoke Garages Range

Scotts timber garages can be manufactured to any size with a wide variety of design possibilities. Scotts can help give you inspiration in designing your own garage, based on extensive experience from manufacturing and installing timber buildings throughout the country.

For the bespoke range of timber garages, Scotts utilises their pattern tongue and grooved shiplap boarding as standard, but you can specify feather edged boarding or a special profile if desired, to create a more traditional feel. The cladding is vacuum pressure impregnated to promote a long maintenance free life. If required the garage can be decorated with a stain or paint to suit individual preferences or to comply with local authority planning requirements.

Garages can be combined with workshops or offices and can be created to match the existing architecture and to your specific size. In addition, they can incorporate individual features, such as clock towers, to create a stunning effect. In fact Scotts can help give you inspiration in designing your own timber garage based on extensive experience from manufacturing and installing buildings throughout the country.

Specification Details for Scotts Bespoke Garages

Although each building is individually designed, we have summarised standard specification details below. Further details can be found in our brochure or alternatively speak to a member of the garages sales team.

BESPOKE SIZES - Scotts bespoke wooden garages can be designed to suit your requirements, so please ask our sales team for advice on the best dimensions to accommodate your vehicle(s). Height to eaves is 2.4m as standard.

BASE REQUIREMENTS - You are required to prepare a concrete base, as specified, ready to take the completed timber building. Detailed drawings will be supplied by Scotts.

WALL FRAMES - Framing at 600mm centres with pressure impregnated sole plate. Wall panels are fixed by chemical bolts into the concrete pad.

WALL CLADDING - Scotts pattern T & G shiplap boarding machined from 19mm x 125mm pine boards, vacuum pressure impregnated using Osmose Naturewood.

ROOF CONSTRUCTION - Trussed rafter roofs are supplied as standard. Roof decking is 15mm exterior grade OSB boarding covered with heavy duty mineralised felt in slate grey or green for a pitch of up to 30º. Clay or slate tiles can be accommodated with a trussed rafter roof at an increased pitch.

DOUBLE DOORS - Framed, ledged and braced double doors and frames, in vacuum pressure impregnated T & G. Standard size available is 2.4m wide x 2.1m high. Alternatively, steel up and over doors are available in a variety of designs and finishes.

SIDE ENTRANCE DOORS - Individual framed, ledged and braced single door, flush on the inside and clad with T & G vacuum pressure impregnated boarding to the outside. Standard size available is 838mm wide x 1981mm high.

BARGE BOARDS - All in selected pine timber, planed and vacuum pressure impregnated. A variety of designs are available to help personalise your timber garage.

GUTTERING - UPVC squareline guttering, supplied in black, complete with all fittings and square section downpipes.

WALL LININGS - V313 boarding is utilised, where specified.

INSULATION - Insulation can be incorporated within side walls and roof area, as required.

PAINT OPTIONS - Scotts bespoke garages are supplied in a pressure treated wood finish, but you can specify a paint or stain to blend in with other buildings or to your preference.

Careful design of your timber garage at the early stages will ensure that it will be a practical, functional and attractive investment, ultimately increasing the value of your home.

The bespoke range of garages can also benefit from a range of optional extras to further personalise and enhance the building. Find out what optional extras can be purchased for your wooden garage or workshop.